All Products (Total 648 Products)
Min. Order: 1 Bag/Bags
Model No.: SS-009
Stainless steel machining on the tool wear is great, in the machining, to minimize the number of tool changes,cnc machining stainless steel process brings high heat, damage to the tool, affecting the finish. The choice of stainless steel cutting fluid, which is very important.It should be noted that stainless steel of...
Min. Order: 1 Bag/Bags
Model No.: SS-008
Turning stainless steel on lathe processing of the object is relatively large workpiece.Usually divided into roughing turning and finishing turning,Rough turning selection of low-speed, large cnc turning capacity.Reduce the number of tool and workpiece contact, while avoiding the tip and rough skin contact, reduce...
Min. Order: 1 Bag/Bags
Model No.: SS-007
Turning stainless steel should follow the following principles:Large diameter of the workpiece with a low speed, The workpiece diameter is small with a high speed.Stainless steel turning tool type selection YG8 series.Stainless steel turning process as far as possible a one-time processing molding, stop half-way will...
Min. Order: 1 Bag/Bags
Model No.: SS-005
316 stainless steel containing chemical elements Mo.So the 316 stainless steel machining parts than 303/304 more resistant to corrosion.Commonly used in chemical, oil, underwater equipment.316 stainless steel hardness higher than 304. The same product Machining time: 316 stainless steel machining processing time is...
Min. Order: 1 Bag/Bags
Model No.: SS-004
303 stainless steel machining is one of the largest stainless steel,High-speed cutting of the product surface roughness can reach Ra1.6. 303 stainless steel machining parts commonly used in processing small precision parts,Including electronics, medical equipment industry.Commonly used stainless steel bolt and nut...
Min. Order: 1 Bag/Bags
Model No.: SS-002
In the milling stainless steel, the workpiece will swell deformation.The expansion coefficient of stainless steel is 1.5 times that of carbon steel.In the stainless steel milling process, the workpiece is easy to produce thermal deformation, dimensional accuracy is difficult to control.Technicians refine the...
Min. Order: 1 Bag/Bags
Model No.: CM-016
Our quality is more secure, providing 100% of the size of the test for CNC milling machining, more often, will design a reasonable detection fixture to ensure higher quality and higher speed of the size of the test.From the procurement of raw materials to CNC machining parts shipments, we have established a complete...
Min. Order: 1 Bag/Bags
Model No.: PL-010
For all plastic turning, we are divided into roughing machining and finishing machining.We are able to provide high quality mechanical turning products. Our technical staff for each drawing based on the material of the product for detailed analysis.The machine parameters for a reasonable set. The factory provides...
Min. Order: 1 Bag/Bags
Model No.: PL-009
Plastic cnc milling must control the deformation of the product, We do a lot of auxiliary fixture.Decomposition processing steps. Some milling plastic parts must go through 12 hours before entering the next processing link. Our plastic machining includes:delrin, neoflon, teflon, ultem, peek, PC ,PMMA, PTFE, PEI,, POM,...
Min. Order: 1 Bag/Bags
Model No.: PL-008
Nylon machining parts high mechanical strength, good toughness, a higher tensile and compressive strength.Friction coefficient is small, high wear resistance.Nylon density is small, in industrial applications, can replace copper.machining nylon parts are bearings, gears, pump leaves and other parts. Our plastic...
Min. Order: 1 Bag/Bags
Model No.: PL-007
We provide high quality plastic cnc service.The technician can control the deformation in plastic machining very well,Product accuracy 0.01mm. Machining plastic Process,Since the hardness of the plastic is low, the machining amount is small.Plastic thermal conductivity is poor, high temperature will melt the...
Min. Order: 1 Bag/Bags
Model No.: PL-006
Machining delrin Parts has a very high mechanical strength, Self-lubricating and good wear resistance.Density is small, lighter than all metals, Delrin machining parts gradually replace metal products. Delrin machining parts Commonly there are two colors: black and white. Insulation and pressure resistance of...
Min. Order: 1 Bag/Bags
Model No.: MS-001
cnc machining carbon steel ISO9001:2008 quality system runs through every department.We obtain the best quality of the products from the following points:The accuracy of the equipment.,To meet the product quality of the CNC machining turning processing technology,The choice of tools and a reasonable auxiliary fixture....
Min. Order: 1 Bag/Bags
Model No.: MS-007
This is a cast steel after machining products, used in machine guide. Buildre Group Co., Ltd is a professional manufacturer of CNC and CNC Machining Services and Molding Services for OEM and ODM parts. And through the ISO 9001: 2008 quality certification system, the production base is located in Shenzhen bright. CNC...
Min. Order: 1 Bag/Bags
Model No.: MS-005
CNC machining metal parts is widely used, after heat treatment to get a good combination of strength and toughness with the comprehensive mechanical properties: you can make gears, connecting rods, bearings. Our CNC machining steel is divided into four categories: Ordinary carbon structural ( Q195,Q215,Q235 ) Quality...
Min. Order: 1 Bag/Bags
Model No.: MS-004
Most of the machining metal parts should be heat-treated to increase the hardness of the workpiece, we have specialized heat treatment suppliers to provide products of the second service We have more than 2,600 square meters building workshop. Has 12 years of experience in CNC milling machining and cnc turning, a...
Min. Order: 1 Bag/Bags
Model No.: CM-018
This is precision cnc machining services parts. As a precision machining service shop, we machine specialty parts out of any specified material, from standard to exotic. Some of the standard materials from which we CNC Milling machining include aluminum, copper, brass, and steel, as well as plasti.Our knowledge and...
Min. Order: 1 Bag/Bags
Model No.: TU-016
CNC turning stainless steels parts with Various stainless steels: 303 / 4305,304 / 1.4301,316. Stainless steels turning parts Dimensional tolerances of 0.01 mm are guaranteed. Stainless steel CNC turning parts has a very good finish. Burnishing mirror surface effect. Ra 0.4 Our CNC Turning Center is equipped with a...
Min. Order: 1 Bag/Bags
Model No.: TU-017
Our small turn part is the smallest size:ф0.5*1mm. CNC turning center in processing small turning parts, spindle speed 3000RPM. Our CNC Turning Center is equipped with a multi-station turret or power turret. The machine has a wide range of processing performance, Machinable linear cylinder, diagonal cylinder, arc and...
Min. Order: 1 Bag/Bags
Model No.: CM-013
We offer tens of thousands of CNC Machining Aluminum Parts. We are skilled in a variety of aluminum alloy CNC milling machining. CNC machining including cnc milling and cnc turning, cunting, grinding, milling, sheet metal fabrication. CNC milling machining and cnc turnining materials are: Aluminum...
Min. Order: 1 Bag/Bags
Model No.: CM-014
We have a wealth of CNC machined plastic technology. We Machining for Plastic, these include: POM.PA, PC, Teflon, transparent PMMA,CNC machined Plastic is widely used as an insulating material, and its density is small, to meet a lot of light weight of the equipment. We offer industry-leading custom CNC turning and...
Min. Order: 1 Bag/Bags
Model No.: CM-015
CNC Machining for Drone Parts For CNC Machining Parts for Drone, we set up a team of sales, engineering, quality, and operations workers. Machining for Drone Part has become a new starting point for the factory. We now offer precision machined parts for DJI. We offer industry-leading custom CNC turning and milling....
Min. Order: 1 Bag/Bags
Model No.: CM-011
Materials for Customized CNC Machining Parts are included: Copper / Bronze, Aluminum 6061,6063,6061-T6,7075,5052.2017.6082. Steel: Q235,45 #, A3, 718H, S136, SKD11. Stainless steel: SU S303, SU S304, (1.4301), SU S316. Plastic:POM,Teflon,PA,(PA66) PC,PMMA. The surface treatment of the Customized CNC Machining Parts is...
Min. Order: 1 Bag/Bags
Model No.: TU-020
We have high precision and high stability of CNC turning machine. In the production of precision cnc turned components process, Our workers operate the machine in strict accordance with the process. We have provided tens of thousands of cnc turned components. Our support team continues to improve the production...
