All Products (Total 648 Products)
Min. Order: 1 Bag/Bags
Model No.: PL-025
Its a machining plastic parts of our company's production and machining. Our company has already provided CNC plastic parts machining services for many years. We have accumulated a lot of experience in the machining plastic parts, especially have extensive experience in resolving machining plastic parts processing...
Min. Order: 1 Bag/Bags
Model No.: SS-014
Milling stainless steel is characterized by: Stainless steel adhesion and meltability, Chip is easy to stick to the cutter Teeth, so that the cutting conditions deteriorate; reverse milling, the first tooth in the hardened surface has been sliding, increased machining hardening trend; milling impact, vibration, so...
Min. Order: 1 Bag/Bags
Model No.: CU-014
This is a brass turned parts, through the picture we can clearly see the smoothness of its surface. Our technical staff has a very skilled technique to deal with the smooth surface of the brass surface. Our company has produced thousands of similar products, with very rich experience in machining. We also replize We...
Min. Order: 1 Bag/Bags
Model No.: TU-031
We are committed to a high Precision Parts Machining, providing industry leading CNC turning and milling quality of service, we not only control the machining parts of the company's products, and strictly control the quality of our suppliers, make the machining parts more perfect. We produce tens of thousands of...
Min. Order: 1 Bag/Bags
Model No.: TU-030
We are committed to a high Precision Parts Machining, providing industry leading CNC turning and milling quality of service, we not only control the machining parts of the company's products, and strictly control the quality of our suppliers, make the machining parts more perfect. We produce tens of thousands of...
Min. Order: 1 Bag/Bags
Model No.: PL-023
Polycarbonate Machining Parts than Acrylic Parts more resistant to high temperature, wider application of working temperature.Machining Polycarbonate parts good electrical insulation.Polycarbonate Machining Parts is a kind of high strength transparent material.Under the same gravity impact, Polycarbonate Machining...
Min. Order: 1 Bag/Bags
Model No.: AL-022
This is a black anodized aluminum parts, laser engraving LOGO and web site, which makes the product more beautiful.Laser engraving on aluminum machined parts, such as: direction, parameters, symbols, uses have been widely used.Laser engraving LOGO for aluminum parts characteristics: no contact with the surface of the...
Min. Order: 1 Bag/Bags
Model No.: AL-023
The Curved Surface Machining by the tool relative to the workpiece coordinate movement in three-dimensional space is formed, and copying milling CNC milling two main machining method, the tool used is generally for ball end milling round head. Copying milling must be pre manufactured with the same and machined surface...
Min. Order: 1 Bag/Bags
Model No.: PL-018
PTFE machining parts has excellent electrical insulation properties, high temperature resistance, good wear resistance,PTFE is also called " F4 " in the industry",PTFE is easy to deform during machining,The machining fixture needs to work Laifu help product.PTFE machining parts insulation and wear resistance, can be...
Min. Order: 1 Bag/Bags
Model No.: TU-024
We offer large parts machining services. machining machining centers and turning centers can process more than 800mm of the workpiece.We are very good at processing metal and plastic parts with a diameter of 200~300mm, and the dimensional tolerance can be controlled in 0.02mm (usually assembly bearing). We produce...
Min. Order: 1 Bag/Bags
Model No.: PL-019
This is a Turning Black Delrin, applied in the motor rotation part of the Parts. Delrin are common in two colors, black and white.Our CNC Turning Center is equipped with multi station turret or power turret, the machine tool has a wide range of processing performance, can be processed straight line, oblique cylinder,...
Min. Order: 1 Bag/Bags
Model No.: PL-020
This is a CNC Milling Delrin, as is known to all, Delrin than aluminum density is small, but the high mechanical strength of the Parts.The use of Delrin electrical insulation performance, many electrical products are often used in Delrin Milling Parts.In the process of Milling Delrin should pay attention to the...
Min. Order: 1 Bag/Bags
Model No.: CM-005
This is a CNC Milling Machined components of Sweeping Robot, the material is Aluminum-7075, black anode. Machined components of Sweeper After surface treatment, one of the surfaces is to be re-machined by the CNC machine, and in the case of secondary machining, a special fixture is used to prevent the product from...
Min. Order: 1 Bag/Bags
Model No.: CM-007
A Precision cnc milling machining parts, used in conjunction with large machines. Each face of the product should be machined, the workpiece size tolerance 0.02mm. We organized a special technical staff on the Special Machining Parts programming, set up each cutting step, cutting the amount of spindle speed. A new...
Min. Order: 1 Bag/Bags
Model No.: AL-025
This is a Machining Aluminum Plate, used in the machine workbench.Our machining center can be a one-time processing of 800*500*100mm parts, including cutting cutting, drilling, tapping, cutting, etc..Aluminum Plate Machining thickness 0.5mm~100mm, flatness and Perpendicular can reach 0.01~0.02mm. And can provide...
Min. Order: 1 Bag/Bags
Model No.: TU-025
This is a High Speed Turning parts Material is Stainless steel Our CNC turning center, the highest speed 6500RPM, equipped with hydraulic through 3-jaw and 4-jaw chuck, Parts in High speed turning has excellent surface. Our CNC Lathes (turning) has three configurations: Single Turret Single Spindle, Twin Turret Twin...
Min. Order: 1 Bag/Bags
Model No.: TU-026
This is a complex and difficult Precision Turned Parts, all dimensions of 0.02mm, there are some 0.01mm.Precision Turned Components process include CNC turning, milling, drilling. Our CNC Turning Center is equipped with a multi-station turret or power turret.The machine has a wide range of processing...
Min. Order: 1 Bag/Bags
Model No.: TU-027
We are good at providing diameter 180~320mm Large Turning Services. (maximum diameter of not more than 680mm).Large CNC turning Parts size tolerance 0.02mm.Our CNC turning center can be strainth turning, taper turning, contour turning, face turning. We offer the fastest machining of sample production. The planned...
Min. Order: 1 Bag/Bags
Model No.: PL-021
Acrylic Machining Parts has a transmission with the same rate of glass,But the density is only half of the glass, and high strength, light weight and so on.Machining Acrylic Parts is widely used in road lighting lamp and auto lamps, transparent pipes. 1 Machining Processes CNC MillingCNC Turning CNC Milling CAM...
Min. Order: 1 Bag/Bags
Model No.: AL-024
High speed machining is particularly suitable for mobile phones, digital cameras, CD products, MP4, Hardware Knobs, audio and other electronic products, the shell of the chamfer.Under the reasonable high speed machining technology, the high light effect is like a mirror.High speed machining aluminum using diamond...
Min. Order: 1 Bag/Bags
Model No.: TU-028
This is a Turning Small Parts, our precision automatic lathe is equipped with six independent tool holders, each holder according to the needs of the process can be loaded with a variety of tools.CNC Turning center rail movement using pneumatic propulsion and return, the perfect realization of rapid turning.Turning...
Min. Order: 1 Bag/Bags
Model No.: AL-021
This is a Thin Sheet Aluminum Machining, the thickness of the parts is 2.0mm, Our machining thin sheet series size 0.5~3.0mm..aluminum 5052,6061,6061-6. length and width can reach 800mm.We have enough machined experience to solve the deformation of thin sheet machining processing. The variety of our precision...
Min. Order: 1 Bag/Bags
Model No.: AL-019
This is a Nickel Plating Machining aluminum Parts, used in the avionics industry.Aluminum parts machining applications are very extensive, but the hardness is low,Wear resistance, poor corrosion resistance.Aluminum and aluminum alloy electroless nickel plating can significantly improve the surface hardness, wear...
Min. Order: 1 Bag/Bags
Model No.: PL-016
Our plastic machining includes:delrin, neoflon, teflon, ultem, peek, PC ,PMMA, PTFE, PEI,, POM, ABS,PA.Torlon.This is a POM machining parts, POM has a high mechanical strength,Abrasion resistance and self-lubricating, and electrical insulation is better,In the high-speed mechanical CNC milling and turning to get a...
