All Products (Total 648 Products)
Min. Order: 1 Bag/Bags
Model No.: AL-105
With the development of modern machining technology, aluminium machined parts has been widely used, especially in the aviation, aerospace and automotive, motorcycle and other engine industries, aluminum machined parts applications are very common. Aluminium machined parts are easier to cut than steel parts, but are...
Min. Order: 1 Bag/Bags
Model No.: PL-063
In machining plastic products, to improve the cutting speed can shorten the cutting time, improve productivity, and the cutting force will not increase, custom plastic products surface roughness is almost not affected by the cutting speed. But when machining plastic products, the cutting speed increase will increased...
Min. Order: 1 Bag/Bags
Model No.: AL-103
Due to the negative electrode potential of aluminum, the parts are prone to electrochemical corrosion during use. Therefore, aluminum alloy is usually used after surface treatment. Gold anodized aluminum uses a silver staining method for machining. After Gold anodising aluminium, a porous gold anodized aluminum oxide...
Min. Order: 1 Bag/Bags
Model No.: AL-102
Brushed aluminum finish is the process of repeatedly scraping aluminum parts with sandpaper. The main process of brushed aluminum finish process is divided into 3 parts: de ester, sand mill and water washing. In the brushed aluminum finish process, after the anodic treatment of special coating technology, can make the...
Min. Order: 1 Bag/Bags
Model No.: PL-060
In recent years, engineering plastic components consumption increased every year. It is expected that the demand for engineering plastic parts will continue to grow in the next few years. Engineering plastic components refers to the plastic parts which has higher properties in strength, modulus and toughness, and...
Min. Order: 1 Bag/Bags
Model No.: PL-061
Machined nylon parts widely replaces wear-resistant parts of mechanical equipment, take the place of copper and alloy as wear resistant parts of equipment. Machined nylon parts applies to wear resistant parts, transmission structures, household electrical appliances, automotive parts, wire rods machinery parts,...
Min. Order: 1 Bag/Bags
Model No.: AL-101
Black anodized aluminum spacers is made from aluminum material by machining and then by anodic oxidation. Black anodized aluminum spacers is a kind of sealed spare part which is used in the mechanical, equipment and pipeline as long as there is fluid, so that the inner and outer parts of the assembly can be sealed....
Min. Order: 1 Bag/Bags
Model No.: CU-030
As technology advances, machining, brass, and products are becoming more diverse. Machining brass products application scope is also more and more widespread, creates the more value for the people's industry. Brass parts parts are very resistant to atmospheric corrosion, durable, recyclable. In addition, brass parts...
Min. Order: 1 Bag/Bags
Model No.: AL-100
With the improvement of people's living standard, the demand for home decoration is higher and higher. Not only good performance but also bright colors are required. And color anodizing aluminum can get all kinds of parts with beautiful colors. When color anodizing aluminum, pure aluminum, aluminum magnesium alloy and...
Min. Order: 1 Bag/Bags
Model No.: TU-046
Cool machined parts refers to the parts that use cutting tools from metal material (blank) or workpiece on the removal of excess metal layer, so as to obtain a certain shape, size, accuracy and surface roughness. Machining cool machined parts processes are turning, drilling, milling, planing, grinding, broaching and...
Unit Price: USD 0.68 / Bag/Bags
| Min.Order |
Unit Price |
| 1 Bag/Bags |
USD 0.68 / Bag/Bags |
Min. Order: 1 Bag/Bags
Model No.: SS-037
Reasonable selection of tool materials is an important condition to ensure high efficiency of custom turning stainless steel. According to the cutting characteristics of custom machined stainless steel, the tool material should be characterized by good heat resistance, high wear resistance and little compatibility...
Min. Order: 1 Bag/Bags
Model No.: CU-029
In the past, in addition to stainless steel, brass electrical components, which were excellent in electrical conductivity and thermal conductivity, were also widely used as materials for electrical and electronic equipment and components. In recent years, the demand for miniaturization and lightweight of electrical...
Min. Order: 1 Bag/Bags
Model No.: AL-099
In security product design, aluminium auto parts is a very good choice. Because aluminum material is very light, corrosion resistant, easy to machining, it is because of these characteristics that aluminium auto parts has the advantages of lightweight and long time corrosion resistance. Aluminium auto parts has...
Min. Order: 1 Bag/Bags
Model No.: AL-098
Aluminum alloy is an important raw material for industrial manufacturing, especially in the automotive industry, aluminum auto parts accounted for the vast majority. But because of the particularity of the material, how CNC custom machining aluminum can achieve the desired effect, which is the key point in the...
Min. Order: 1 Bag/Bags
Model No.: CM-034
With the growing demand for the CNC milled parts market, new applications require a more sophisticated CNC milled parts, and these CNC milled parts are required to be manufactured with materials that are more difficult to machining. In this highly competitive aluminum milling service field, machine tool technology has...
Min. Order: 1 Bag/Bags
Model No.: AL-097
Aluminum and its alloy can be dyed after custom anodizing service, The chemical coloring process has the advantages of simple process, easy control, high efficiency, low cost, low equipment investment, wide color gamut and bright color. Generally, the pore diameter of quality anodizing aluminum oxide film is...
Min. Order: 1 Bag/Bags
Model No.: TU-045
Small part machining is a strong growth market in the manufacturing sector. Medical, hydraulic, connector, automotive, information, electronics and home appliance industries are rapidly increasing demand for small CNC parts. In addition, in aerospace and defense industry, equipment control systems are increasingly...
Min. Order: 1 Bag/Bags
Model No.: CM-033
Milled aluminum parts refers to the aluminum alloy as the main raw material, through a series of machining, packaging process to get the daily supplies, industrial supplies. Milled aluminum parts can be used in aviation, construction, automotive, food and other major industries. Our country's milled aluminum parts...
Min. Order: 1 Bag/Bags
Model No.: AL-096
In order to reduce weight, aviation industry uses electroless nickel aluminum parts extensively, after electroless nickel plating surface strengthening, not only corrosion resistance, wear resistance, but also welding, such as stroke, the engine piston head will improve service life after electroless nickel plating....
Min. Order: 1 Bag/Bags
Model No.: PL-058
CNC precision machining plastic cutting tools are mainly high-speed steel, carbide, diamond and so on. General CNC precision machining plastic, you can choose the first two tool materials. But machining glass fiber reinforced plastic should choose diamond tool. Because glass fiber reinforced plastic is made of two...
Min. Order: 1 Bag/Bags
Model No.: CU-028
Brass is copper and zinc alloys which named for its yellow color. Machined brass components has very good mechanical properties and wear resistance, can be used to manufacture precision instruments, ship parts, guns, shell and so on. Because of its corrosion resistance and antimicrobial properties, machined, brass,...
Min. Order: 1 Bag/Bags
Model No.: CU-027
Brass machined components is widely used in the production of various mechanical parts because of its excellent thermal conductivity and conductivity, such as power industry, central air-conditioning, car tanks and other large heat transfer equipment contains brass machined components. Brass machined components in air...
Min. Order: 1 Bag/Bags
Model No.: CU-025
Machined brass parts has a strong abrasion resistance, it has high strength, hardness, chemical resistance, as well as the mechanical performance of cutting is more prominent. In shipbuilding, machined brass parts are often used as valves, sleeves, end caps, decorations and other parts. In addition, machined brass...
Min. Order: 1 Bag/Bags
Model No.: CU-024
The mechanical properties are different in brass turned components because of the different zinc content. When the amount of zinc increases to about 45%, the room temperature strength of brass turned components increases continuously. If further increase in the amount of zinc, brass turned components will be brittle,...
