All Products (Total 648 Products)
Min. Order: 1 Bag/Bags
Model No.: AL-058
The density of aluminum alloy is about 1/3 of the steel, while the elastic modulus is close to that of the steel, which leads to greater springback of the thin aluminium sheet. In prophase process autoform simulation is needed to compensate springback. Thin aluminium sheet is sensitive to temperature, low temperature...
Min. Order: 1 Bag/Bags
Model No.: MS-015
Generally, the typical CNC tool properties required for precision steel machining are: high heat hardness and chemical stability, but also related to process, workpiece and cutting conditions; The cutting edge is required to have toughness, heat resistance fatigue wear and edge strength. The degree of satisfaction of...
Min. Order: 1 Bag/Bags
Model No.: PL-041
Custom made plastic parts are usually produced by direct forming methods, but some custom made plastic parts must be CNC machined when they are difficult to be directly formed or require accuracy. Precision plastic components are generally machined by using cutting metal equipment. As the performance of plastic and...
Min. Order: 1 Bag/Bags
Model No.: CU-022
Brass is an alloy of copper and zinc. Our factory production of brass hardware parts contain less than 45% of zinc, enough to guarantee that they will not be hard and brittle and degrade performance. Brass with different mechanical properties can be obtained by changing the content of copper and zinc in brass. The...
Unit Price: USD 1 / Bag/Bags
| Min.Order |
Unit Price |
| 1 Bag/Bags |
USD 1 / Bag/Bags |
Min. Order: 1 Bag/Bags
Model No.: SS-029
Stainless steel rod machining is generally used in the metallurgical industry and chemical industry, but under the circumstances of the insufficient supply of the market, how to improve the efficiency of stainless steel rod machining has been the concern of the machining industry. In the stainless steel rod machining...
Min. Order: 1 Bag/Bags
Model No.: PL-040
PEEK is a kind of special engineering plastics with excellent performance. PEEK machined parts has more significant advantages compared with other special engineering plastics parts. PEEK as a new type of semi crystalline aromatic plastic engineering plastics, PEEK machined parts has excellent physical and mechanical...
Min. Order: 1 Bag/Bags
Model No.: AL-057
It is easy to occur sticky knife in high speed milling aluminum parts, and it mainly due to the characteristics of aluminum parts. Compared with the majority of steel and cast iron, metal aluminum parts have the characters of lower yield strength and lower hardness. In the high speed milling aluminum parts process...
Min. Order: 1 Bag/Bags
Model No.: SM-002
Sheet metal manufactuing is the use of sheet metal production of chimney, bucket, tank Youhu, ventilation pipe, elbow reducer, Tianyuandifang, funnel and so on, main process, bending, shear buckling edge bending forming, welding, riveting, requires a certain knowledge of geometry. Custom Sheet metal fabrication steps:...
Min. Order: 1 Bag/Bags
Model No.: SS-028
Stainless steel refers to resistant to the air, steam, water and other weak corrosive medium and acid, alkali, salt and other chemical corrosive medium corrosion of steel, stainless steel is one of the highest strength of metal materials used in construction. Because stainless steel parts has good corrosion...
Min. Order: 1 Bag/Bags
Model No.: AL-053
Thin aluminum sheet in the aviation, energy and other fields of application is very extensive. But the stiffness of the thin aluminum sheet parts is relatively low, and it is easy to deform during the milling process, milling process produced by the cutting force on the processing accuracy is very obvious.Thin...
Min. Order: 1 Bag/Bags
Model No.: AL-056
Aluminum housing parts is a variety of shell made of aluminum alloy, Aluminum housing parts material achievements of its high-grade fire and explosion-proof function. Aluminum housing parts because of convenient processing, high flexibility, higher grades, can effectively increase the added value of products, can be...
Min. Order: 1 Bag/Bags
Model No.: SS-027
When machining stainless steel metal parts, the geometry of the cutting part of the tool should be considered in terms from the choose of the front angle and the back angle. In the choice of rake angle, to consider the chip flute type, with or without chamfering and blade angle of positive and negative angle size and...
Min. Order: 1 Bag/Bags
Model No.: CM-028
ABS resin is one of the five major synthetic resin, ABS plastic parts has the impact resistance, heat resistance, low temperature resistance, chemical resistance and excellent electrical performance, while the ABS plastic parts also has the characteristics of easy processing, stable size, good surface gloss, easy...
Min. Order: 1 Bag/Bags
Model No.: SS-026
This is a stainless steel fabrication parts, our factory provides precision machining stainless steel services. The strength and hardness of the stainless steel is very low, but the plasticity is very high, and it has good acid resistance and corrosion resistance. It is very difficult to process with conventional...
Min. Order: 1 Bag/Bags
Model No.: AL-052
Small metal parts is used in military, aerospace engineering and communications, automotive. Do not underestimate it is just a small metal parts, it has a connected, fixed and beautiful role, the fixed place to tighten the seamless connection, the activities of the place to make it flexible is not tight, so as to...
Min. Order: 1 Bag/Bags
Model No.: TU-039
This is a precision medical machining parts. Smaller, more complex, higher precision medical equipment industrial components are often made of difficult to machining materials, the market demand for such micro machined parts continued to grow. When referring to the machining of the medical device industry, related...
Min. Order: 1 Bag/Bags
Model No.: TU-040
Because of its excellent comprehensive balance performance, ULTEM plastic material has been successfully applied to the departments of electronics, electrical engineering and aviation, and is used as a metal substitute for traditional products and cultural daily necessities. The use of ULTEM plastic material to...
Min. Order: 1 Bag/Bags
Model No.: AL-051
Our company has 10 years of experience in custom metal fabrication, and is a large manufacturer of machining metal and plastic parts. In high volume machining, based on the workpiece aluminum alloy is soft with a high degree of ductility, aluminum parts often due to the effect of internal stress, the cutting heat and...
Min. Order: 1 Bag/Bags
Model No.: SM-001
This is a machining sheet metal part, the picture shown is just for exhibition and display of our production. So please feel free to send us 3D drawing with STL/IGS/STP file and your product description. We have the magic to turn it into real products, and then we will give you a quotation. If you have any enquiry,...
Min. Order: 1 Bag/Bags
Model No.: AL-043
The use of metal cutting tools from the metal material (rough) cut off the excess metal layer, so as to obtain the shape, dimensional accuracy and surface quality are in line with the requirements of the drawings, such machining methods known as metal cutting. There are many kinds of metal cutting methods, common has...
Min. Order: 1 Bag/Bags
Model No.: AL-050
Internal thread cutting can be made in several different ways. In traditional internal thread cutting, thread taps can be used to cut the internal threads by manual or maneuvering in a pre drilled holes. With the development of CNC machine tools, thread milling has been introduced into internal thread cutting as an...
Min. Order: 1 Bag/Bags
Model No.: AL-049
5052 aluminum parts is a kind of the most widely used antirust aluminum parts, in the CNC aluminium milling process, it has good forming performance, high strength, especially with anti fatigue strength, good cold workability, can not heat treatment to strengthen, high plasticity, in the semi cold hardening plasticity...
Min. Order: 1 Bag/Bags
Model No.: AL-048
Aluminum alloy parts by hard anodized, the surface can be formed thickness of 30 ~ 50μm and hardness of about 500HV film layer, with excellent corrosion resistance and wear resistance. This hard anodized aluminum parts can be directly assembled and used, the film has microporous, can absorb a variety of lubricants,...
Min. Order: 1 Bag/Bags
Model No.: AL-047
This is an anodising of aluminum part, it is first machined by CNC milling and then black anodizing processing. In the case of mechanical cutting, not only the cutting force but also the cutting motion are provided by the machinery. With the help of machine tools, shorter processing time, higher dimensional accuracy...
