All Products (Total 648 Products)
Min. Order: 1 Bag/Bags
Model No.: PL-032
PVDF is the abbreviation of Poly (vinylidene fluoride). The appearance of translucent or white powder or particles, the molecular chain arranged closely, and a strong hydrogen bond. PVDF plastic parts has good chemical resistance, high temperature resistance, oxidation resistance, weather resistance, radiation...
Min. Order: 1 Bag/Bags
Model No.: SS-020
Stainless steel parts machining is a process of changing the dimensions or performance of stainless steel workpieces by mechanical equipment. Stainless steel parts with unique strength and high wear resistance and excellent corrosion resistance and not easy to rust characteristics, in many areas have been used, such...
Min. Order: 1 Bag/Bags
Model No.: AL-034
Now, with the continuous improvement of people's living standards, we often use aluminum parts machining, which gives our lives a great convenience. We are in the aluminum parts machining of the time to pay attention to detail, this way can produce high quality products. In some cases, we will find that the aluminum...
Min. Order: 1 Bag/Bags
Model No.: SS-016
316 stainless steel has a wide range of materials for pulp and papermaking equipment for heat exchangers, dyeing equipment, film flushing equipment, pipes, and coastal areas. Buildre Group Co., Ltd is a professional manufacturer of CNC and CNC Machining Services and Molding Services for OEM and ODM parts. And through...
Min. Order: 1 Bag/Bags
Model No.: AL-033
Aluminium parts relative to other metal parts, it is no metal pollution, no toxicity, the appearance of oxide layer without volatile metal. Aluminium parts has a strong corrosion resistance, and has excellent thermal function and conductive function, in the short distance transmission outstanding. Aluminium parts of...
Min. Order: 1 Bag/Bags
Model No.: AL-032
As we all know, the purchase of aluminum components are to install to other equipment, to show greater results, but if you buy a defective aluminum components, not only their own use of life reduction, more likely to damage the use of equipment. Therefore, in the purchase of aluminum components machining factory, it...
Min. Order: 1 Bag/Bags
Model No.: AL-031
Cast aluminum parts density is smaller than cast iron parts and cast steel parts, and the specific strength is higher. Therefore, under the same load conditions using cast aluminum parts, can reduce the weight of the structure, so in the aviation industry and power machinery and transport machinery manufacturing, cast...
Min. Order: 1 Bag/Bags
Model No.: AL-030
In the procession of machining aluminum blocks, aluminum blocks can be heat treated to obtain good mechanical properties, physical properties and corrosion resistance. Aluminum blocks has been widely used in aerospace, automotive, machinery manufacturing, ship aluminum and chemical industries. After Machining the size...
Min. Order: 1 Bag/Bags
Model No.: AL-029
This is a custom turning aluminium parts. And this custom turning aluminium parts finished by anodizing black. In adition, this aluminium parts is a large one, it's size is ф185*352. Our factory can machining the following sizes of products in the workshop: CNC Milling Parts ( Max ) : Length 1030mm,Width 800mm, Height...
Min. Order: 1 Bag/Bags
Model No.: PL-031
Our company as a big CNC machining center in Chinia, we have the lathe, milling machine, grinding machine, CNC machine and so on. We have rich experience in turning PTFE plastic parts. We have some professionals engaged in PTFE plastic parts turning which makes our PTFE plastc parts have better quality than other...
Min. Order: 1 Bag/Bags
Model No.: PL-030
Buildre Group Co., Ltd is very professional in plastic parts CNC milling and turning this field. We have exported CNC milling plastic parts to many coutries. Your satisfaction is our success, if you need, you can send the drawings to us, we will reply to you as soon as possible. 1 Machining Processes CNC MillingCNC...
Min. Order: 1 Bag/Bags
Model No.: PL-029
Buildre Group Co., Ltd is a professional manufacturer of CNC plastic parts machining. Our CNC plastic parts machining includes:delrin, neoflon, teflon, ultem, peek, PC, PMMA, PTFE, PEI, POM, ABS. We according to your drawing to make the CNC Machining plastic parts. Our goal is provide the best quality and reasonable...
Min. Order: 1 Bag/Bags
Model No.: AL-028
This is a CNC machined aluminum parts, we have the following materials of aluminum parts machining: 6061, 6061-T6,6063,7075,5052,2024,2017. For aluminum parts machining, we offer the following secondary service: Anodize, Hard Anodize, Hard Anodize Teflon, Electroless Nickel, Sand Blasting, Brushed, Trivalent Chromium...
Min. Order: 1 Bag/Bags
Model No.: CU-016
The picture you see is a high precision bronze parts turning. At the top of the bronze parts there is a 0.6 mm diameter hole. Our company has produced thousands of such high-precision parts. We offer industry-leading custom CNC turning and milling. Our precision parts serve medical, communications, aerospace, drone,...
Min. Order: 1 Bag/Bags
Model No.: SS-015
We are a company that provides custom stainless steel parts services. Specializing in the production of turning pieces stamping parts, anchors, fasteners, pipe fittings and other stainless steel products, with professional and technical team, advanced equipment, strong strength, welcome customers to negotiate...
Min. Order: 1 Bag/Bags
Model No.: PL-002
Brown ultem is a high-quality wear-resistant material, also has a high mechanical strength.Ultem plastic machining parts used in automotive back covers, electrical components, heat exchange components, medical equipment. We have a dedicated CNC machining technology team.Factory processes: order review, drawing review,...
Min. Order: 1 Bag/Bags
Model No.: CM-023
Our machining center can provide High Speed Milling, the machine spindle speed can reach 60000RPM, CNC Milling Speed High to achieve the effect of Ra0.4.High Speed Milling speed, the workpiece will not cause deformation.In order to ensure the mirror effect after processing, different materials, Milling High Speed tool...
Min. Order: 1 Bag/Bags
Model No.: PL-028
This is a machining black delrin parts. Delrin parts has high thermal stability and chemical stability, good dielectric properties, excellent electrical insulation, solvent resistance, stress-free cracking. Delrin Parts have good mechanical properties and rigidity, close to the metal material, although the shrinkage...
Min. Order: 1 Bag/Bags
Model No.: PL-026
This is a custom plastic machining. Our company (Buildre Group Co.,Ltd) is a professional manufacturer of plastic machining Services and Molding Services for OEM and ODM parts. We have more than 2,600 square meters building workshop. Has 12 years of experience in CNC milling machining and cnc turning, a dedicated...
Min. Order: 1 Bag/Bags
Model No.: MS-013
This is a CNC turning metal parts. CNC turning metal parts have the following characteristics: Features 1: Rotary body parts, Feature 2: metal with hardness below 40HRC. We also provide the following materials for processing: Aluminum 6061, 6061-T6,6063,7075,5052,2024,2017. Copper,Brass,Bronze,Phosphor Bronze.(...
Min. Order: 1 Bag/Bags
Model No.: SS-018
This is a custom milling 304 stainless steel parts. We offer industry-leading custom CNC turning and milling. Our precision parts serve medical, communications, aerospace, drone, and robots. Providing the best CNC turning and CNC horizontal / vertical milling. Our extensive range of state-of-the-art CNC lathes and CNC...
Min. Order: 1 Bag/Bags
Model No.: CU-012
Brass is made of copper and zinc alloy. It has the advantage of high strength, hardness, resistance to chemical corrosion. Brass is often used to manufacture valves, water pipes, air conditioning inside and outside the machine connecting pipe and radiator. Our company offers three types of machining copper: copper,...
Min. Order: 1 Bag/Bags
Model No.: AL-026
This is a sample machining aluminum parts. The picture shown is just for exhibition and display of our production. So please feel free to send us 3D drawing with STL/IGS/STP file and your product description. We have the magic to turn it into real products, and then we will give you a quotation .If you have any...
Min. Order: 1 Bag/Bags
Model No.: CU-13
This is a small brass parts, this is a sample of professionally machined brass parts in our company. We are a specialized company specializing in the processing of copper pieces like this. And we offer a variety of customized services, if you are intersiting in this, you can contact us with your drawings, also if you...
