All Products (Total 648 Products)
Min. Order: 1 Bag/Bags
Model No.: CM-035
Many considerations are needed before the Custom milling aluminum route is determined, for example: ① ensure the machining accuracy and surface quality of CNC machined aluminum, and the efficiency should be high. ② The custom milling aluminum route should as short as possible, to reduce the empty travel time and the...
Custom CNC Milling Machining Brass Parts Service Brass is the most widely used copper alloy material because of its excellent chemical, physical, mechanical and free cutting properties. Mainly used in electronics, electrical appliances, locks, connectors, plug-in plumbing valve body, water meters, flanges, children's...
Min. Order: 1 Bag/Bags
Model No.: AL-027
This is a silver-plated aluminum parts, our company offers aluminum surface silver-plated service. A silver-plated aluminum parts housing, the contact resistance even smaller, better conductivity. Aluminum and its alloys are much more difficult to silver plating than conventional copper pieces, and the process is...
Min. Order: 1 Bag/Bags
Model No.: CM-083
CNC Milling Machining Small Aluminium Spare Parts Aluminum alloy has good mechanical properties, small density, good conductivity and thermal conductivity, so aluminium spare parts are widely used in industry. The strength and hardness of aluminum alloy are low, and the cutting load is small. Due to the good thermal...
Precision Turning Machining 303 Stainless Steel Tube When turning stainless steel on a lathe, improving the surface finish of the cutting part of the tool can reduce the resistance of chip curling and improve the durability of the tool. Compared with the ordinary carbon steel, the cutting parameters of stainless steel...
Turning Machining 304L Stainless Steel Products In the process of CNC high-speed turning 304L stainless steel, due to the extrusion of the tool tip on the workpiece material, the metal in the cutting area of stainless steel products will deform, the crystal will slip, the lattice will be distorted, the microstructure...
Min. Order: 1 Bag/Bags
Model No.: CU-002
Brass has a good CNC machining performance. Because brass has excellent wear resistance, so tool wear should be considered in the machining process. High-speed turning and milling machining brass can get a good finish. We also provide secondary CNC machining services, the surface finish of CNC brass parts can up to...
Min. Order: 1 Bag/Bags
Model No.: TU-006
We offer High Precision CNC turning services.include CNC lathe services.Inspection equipment can be measured to 0.001mm, the accuracy of the product can reach 0.005mm.Powerful cnc machining turning technical team is to ensure that the basis of product quality,Our engineers focus on continuously improving CNC turning...
Unit Price: USD 1.5 / Bag/Bags
Min.Order |
Unit Price |
1 Bag/Bags |
USD 1.5 / Bag/Bags |
Min. Order: 1 Bag/Bags
Model No.: CU-058
Turning Machining Brass Components on A Lathe Methods to improve the surface quality of brass turning components processed by automatic lathe: 1. Reduce the height of residual area. In turning machining brass fittings, the height of the residual area can be reduced by reducing the main deflection angle, the secondary...
Unit Price: USD 1.5 / Bag/Bags
Min.Order |
Unit Price |
1 Bag/Bags |
USD 1.5 / Bag/Bags |
Min. Order: 1 Bag/Bags
Model No.: CU-055
Automatic CNC Turning Machining Custom Brass Screw Inserts This is a special customized brass screw with two flat positions at one end machined by our automatic CNC lathe. Our automatic CNC lathe can produce all kinds of customized products at high speed and high quality according to the needs of customers. Our CNC...
Min. Order: 1 Bag/Bags
Model No.: AL-138
Machining Aluminum Test Tube Heating Block This is a custom aluminum test tube heating block, and anodized surface treatment is adopted after machining. In machining aluminum test tube heating block, it should be noted that the size of each aperture should be consistent with the test tube, and the surface of the...
CNC Milling Machining Simple Aluminum Parts Hardware We machining this simple aluminum parts hardware with special fixture made by ourself. The special fixture is specially designed according to the requirements of the machining procedure of CNC small aluminum parts. The positioning elements on the fixture can make...
Nickel Plated CNC MachinIng, Parts the material is Aluminum6061-T6, the surface can get a very good finish, corrosion resistance. We use the EPE Foam product packaging, to ensure that products are not scratched. Before and after nickel-plated products are different sizes, in the machining process must be on the repair...
Aluminum Block for Thermo Fisher Products The machined aluminum heating block for laboratory has moisture-proof, chemical corrosion resistance, fast heating speed, stable temperature and uniform heating. The main purpose of machined aluminum heating block for laboratory is to replace dangerous oil bath and ensure the...
Min. Order: 1 Bag/Bags
Model No.: SS-065
Turning Machining 304L Stainless Steel Products In the process of CNC high-speed turning 304L stainless steel, due to the extrusion of the tool tip on the workpiece material, the metal in the cutting area of stainless steel products will deform, the crystal will slip, the lattice will be distorted, the microstructure...
Min. Order: 1 Bag/Bags
Model No.: AL-072
The hand parts of various tools and machine parts, which are often roll out a variety of different patterns on the surface of the workpiece, for ease of holding and adding beauty. Knurled aluminum parts often used as baifenche casing, hinge bar wrench and screw gauge etc.. The patterns of knurled aluminum rod are...
Min. Order: 1 Bag/Bags
Model No.: SS-006
stainless steel machined partsdue to the high surface finish and corrosion resistance and good characteristics,Commonly used in aerospace, petroleum, chemical and other fields.As the toughness of stainless steel, high heat intensity, easy to wear when processing the tool, easy to stick at high temperatures.The same...
Min. Order: 1 Bag/Bags
Model No.: AL-054
There are many products of the parts or shell is processed by aluminum, and then through the black anodizing process, the surface of the part becomes black, this anodied aluminum parts after laser engraving, the scale, logo, company name and other information that carved on the engraving aluminum parts will be...
Min. Order: 1 Bag/Bags
Model No.: CU-009
This is a process for over 800A current machining copper parts should be used in large-scale welding machine accessories.Copper machined parts have excellent electrical properties, excellent corrosion resistance and ease of processing, as well as good strength and fatigue resistance.Pure copper color is red, called...
Min. Order: 1 Bag/Bags
Model No.: AL-199
CNC Machined Aluminum Telescope Parts With Purple Anodized The matters needing attention in the process of anodizing aluminum service are as follows: 1. Reasonable control of anodic oxidation process conditions, including solution temperature, voltage and time. 2. In the anodizing aluminum process, attention should be...
Min. Order: 1 Bag/Bags
Model No.: PL-045
With the continuous development of society, in order to meet the needs of shapes, turning color plastic parts are used more and more in the product structure. Turning color plastic parts can attract people's attention more. Consumers pay more attention to color than black and white, of which warm colors (yellow, red,...
Min. Order: 1 Bag/Bags
Model No.: PL-039
Delrin is a type of POM. Delrin plastic parts can replace the majority of non-ferrous metals, automobiles, machine tools, instrument parts, bearings, fasteners, gear, spring sheet, pipe, conveyer belt fittings, electric water heater, pump shell, drainer, faucets and so on.Delrin plastic parts with high mechanical...
Min. Order: 1 Bag/Bags
Model No.: PL-011
This is a CNC machining ultem parts. As we all know, ultem has a high mechanical strength in plastic class. Is a high-quality wear-resistant, corrosion-resistant materials. Ultem machining parts is very well tolerated under seawater and salt water immersion. Our plastic machining includes: delrin, neoflon, teflon,...
Min. Order: 1 Bag/Bags
Model No.: PL-027
Acrylic parts are the best and most easy to machined plastic materials, its various specifications are widely used in color mask, lighting ceiling, aircraft and windows of the car and so on. Acrylic parts has the Advantages of high transmittance low turbidity, excellent workability, excellent weather resistance and so...